UM
Crack propagation analysis of 3D printed functionally graded titanium alloy components
Cao,Jinlong; Kou,Kunpang; Lam,Chichiu
2021-02-01
Source PublicationTheoretical and Applied Fracture Mechanics
ISSN0167-8442
Volume111
AbstractThis paper presents an approach with a modified M-integral for determining the stress intensity factors of cracked functionally graded titanium alloy (FGTA) components. A derivative term of the strain energy density with respect to the spatial coordinate is embedded in the modified M-integral to account for the effect of the varying elastic moduli of functionally graded material. The validity of the modified M-Integral is validated by comparison with the experimental results of the crack propagation of FGTA specimens that are manufactured by using three-dimensional (3D) printing. Resistance tests of the cracked FGTA specimens are simulated to investigate the effects of the controlled changes in the material properties on the residual strength and crack-tip stress intensity factor. Further simulations of the fatigue crack propagation of the cracked FGTA specimens are performed to examine the influence of the changes in the material properties on the fatigue crack propagation life and crack propagation rate. The analysis results indicate that the numerical method in this study can accurately simulate the crack propagation of FGTA specimens. At present, due to the complexity and limitations of additive manufacturing of materials with gradient variations, it is not available to manufacture fully graded components through 3D printing for experiments. Therefore, this study assumes an FGTA beam model that is a fully graded material model to examine the effect of material gradient on crack propagation.
Keyword3D printing technique Crack propagation Functionally graded titanium alloy M-integral Paris law
DOI10.1016/j.tafmec.2020.102865
URLView the original
Language英语
Fulltext Access
Citation statistics
Cited Times [WOS]:0   [WOS Record]     [Related Records in WOS]
Document TypeJournal article
CollectionUniversity of Macau
Corresponding AuthorCao,Jinlong
AffiliationDepartment of Civil and Environmental Engineering,Faculty of Science and Technology,University of Macau,Macau,999078,China
First Author AffilicationFaculty of Science and Technology
Corresponding Author AffilicationFaculty of Science and Technology
Recommended Citation
GB/T 7714
Cao,Jinlong,Kou,Kunpang,Lam,Chichiu. Crack propagation analysis of 3D printed functionally graded titanium alloy components[J]. Theoretical and Applied Fracture Mechanics,2021,111.
APA Cao,Jinlong,Kou,Kunpang,&Lam,Chichiu.(2021).Crack propagation analysis of 3D printed functionally graded titanium alloy components.Theoretical and Applied Fracture Mechanics,111.
MLA Cao,Jinlong,et al."Crack propagation analysis of 3D printed functionally graded titanium alloy components".Theoretical and Applied Fracture Mechanics 111(2021).
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Cao,Jinlong]'s Articles
[Kou,Kunpang]'s Articles
[Lam,Chichiu]'s Articles
Baidu academic
Similar articles in Baidu academic
[Cao,Jinlong]'s Articles
[Kou,Kunpang]'s Articles
[Lam,Chichiu]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Cao,Jinlong]'s Articles
[Kou,Kunpang]'s Articles
[Lam,Chichiu]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.