UM

Browse/Search Results:  1-10 of 11 Help

Selected(0)Clear Items/Page:    Sort:
Mechanically strong hydrogels achieved by designing homogeneous network structure Journal article
Materials and Design, 2019,Volume: 163
Authors:  Hu X.;  Liang R.;  Li J.;  Liu Z.;  Sun G.
Favorite | View/Download:12/0 | TC[WOS]:6 TC[Scopus]:0 | Submit date:2019/04/08
Clusters  Hydrogels  Integrity  Self-recoverability  
Fabrication of pre-alloyed Al-Li powders with high Li content via thermal dehydrogenation of LiH and rapid solidification process Journal article
Materials and Design, 2016,Volume: 94,Page: 159-165
Authors:  Kim S.H.;  Hui K.N.;  Kim Y.-J.;  Lim T.-S.;  Yang D.-Y.;  Kim K.B.;  Kim Y.J.;  Jang G.J.;  Yang S.
Favorite | View/Download:1/0 | TC[WOS]:13 TC[Scopus]:0 | Submit date:2019/04/08
LiH  Pre-alloyed Al-Li powders  Rapid solidification  Thermal dehydrogenation  
Estimation of the poroelastic properties of calcium-silicate-hydrate (C-S-H) gel Journal article
Materials and Design, 2016,Volume: 92,Page: 107-113
Authors:  Hu C.;  Gao Y.;  Chen B.;  Zhang Y.;  Li Z.
Favorite | View/Download:1/0 | TC[WOS]:7 TC[Scopus]:0 | Submit date:2019/04/08
Calcium-silicate-hydrate gel  Micromechanics  Poroelastic properties  
New approach for characterisation of mechanical properties of cement paste at micrometre scale Journal article
Materials and Design, 2015,Volume: 87,Page: 992-995
Authors:  Chen S.J.;  Duan W.H.;  Li Z.J.;  Sui T.B.
Favorite | View/Download:4/0 | TC[WOS]:16 TC[Scopus]:0 | Submit date:2019/04/08
Image analysis  Micromechanics  Microstructure  Pore size distribution  SEM  
Towards square hole-flanging produced by single point incremental forming Journal article
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2015,Volume: 229,Issue: 5,Page: 380-388
Authors:  VAM Cristino;  L Montanari;  MB Silva;  PAF Martins
Favorite | View/Download:7/0 | TC[WOS]:5 TC[Scopus]:0 | Submit date:2019/04/16
Single Point Incremental Forming  Square Hole-flanging  Deformation  Formability  Fracture  
Towards square hole-flanging produced by single point incremental forming Conference paper
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Authors:  Cristino V.A.M.;  Montanari L.;  Silva M.B.;  Martins P.A.F.
Favorite | View/Download:5/0 | TC[WOS]:5 TC[Scopus]:0 | Submit date:2019/03/28
deformation  formability  fracture  Single point incremental forming  square hole-flanging  
Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste Journal article
Materials and Design, 2014,Volume: 64,Page: 497-502
Authors:  Ma H.;  Xu B.;  Liu J.;  Pei H.;  Li Z.
Favorite | View/Download:4/0 | TC[WOS]:83 TC[Scopus]:0 | Submit date:2019/04/08
Chemically bonded ceramics  Compressive strength  Intrinsic permeability  Magnesium potassium phosphate cement  Pore structure  
Characterization of three- and four-point bending properties of porous metal fiber sintered sheet Journal article
Materials and Design, 2014,Volume: 56,Page: 522-527
Authors:  Zhou W.;  Wang Q.;  Ling W.;  He L.;  Tang Y.;  Wu F.;  Liao J.;  Hui K.S.;  Hui K.N.
Favorite | View/Download:3/0 | TC[WOS]:9 TC[Scopus]:0 | Submit date:2019/04/08
Bending properties  Porosity  Porous materials  Sintering parameters  
Characterization of electrical conductivity of porous metal fiber sintered sheet using four-point probe method Journal article
Materials and Design, 2012,Volume: 37,Page: 161-165
Authors:  Zhou W.;  Tang Y.;  Song R.;  Jiang L.;  Hui K.S.;  Hui K.N.
Favorite | View/Download:2/0 | TC[WOS]:27 TC[Scopus]:0 | Submit date:2019/04/08
B. Fibers and filaments  C. Sintering  E. Electrical properties  
Compressive properties of porous metal fiber sintered sheet produced by solid-state sintering process Journal article
Materials and Design, 2012,Volume: 35,Page: 414-418
Authors:  Zhou W.;  Tang Y.;  Liu B.;  Song R.;  Jiang L.;  Hui K.S.;  Hui K.N.;  Yao H.
Favorite | View/Download:3/0 | TC[WOS]:26 TC[Scopus]:0 | Submit date:2019/04/08
B. Fibers and filaments  C. Sintering  E. Mechanical properties