Creep behavior and mechanical properties of carbon fiber nano-composites
Li Y.-L.2; Shen M.-Y.2; Chen W.-J.2; Chiang C.-L.1; Yip M.-C.2
Source PublicationAdvanced Materials Research
AbstractIn recent years, it has been observed that surface modification of carbon nanotubes (CNTs)influences on CNT's distribution among epoxy resin and affects the mechanical properties of CNTs. Accordingly, the treatment of CNTs to with organic acids to oxidize them generates functional groups on the surface of CNTs. This investigation studies the consequent enhancement of the mechanical properties of CNTs. The influence of adding various proportions of CNTs to the epoxy resin on the mechanical properties of the composites thus formed is investigated, and the strength of the material is tested at different temperatures. The creep behaviors of carbon fiber (CF) /epoxy resin thermosetting composites and CNTs/CF/ epoxy resin composites were tested and analyzed at different stresses, orientations of fiber, temperatures and humidities. The creep exhibits only two stages- primary creep and steady-state creep. The effects of creep stress, creep time, and humidity on the creep of composites that contain various proportion of CNTs were investigated at various temperatures. Additionally, increasing the number of cycles in cyclic creep tests at room temperature resulted in a decrease in creep strain even at a high temperature of 55°C. Possible room temperature creep mechanisms have been proposed and discussed. With increasing number of creep tests, the creep strain decreased due to strain hardening which occurred during creep. Creep strain is believed to increase with applied stress, creep time, humidity, temperature and degree of the angle θ between the orientation of fiber and the direction of the applied stress. Moreover, the test results of creep strain of CF/epoxy resin composites and CNTs/CF/epoxy resin composites tested under various conditions can be smoothly fitted by the fitting curves of Findley power law. Finally, the test results also indicate that mechanical strength increase with the amount of CNTs added to the composites. Different coefficients of expansion of the matrix, fiber and CNTs, are such that overexpansion of the matrix at high temperature results in cracking in it. An SEM image of the fracture surface reveals debonding and the pulling out of longitudinal fibers because of poor interfacial bonding between fiber and matrix, which reduce overall strength. © (2011) Trans Tech Publications.
KeywordCarbon fiber Carbon nanotube Creep Findley power law
URLView the original
Fulltext Access
Citation statistics
Document TypeConference paper
CollectionUniversity of Macau
Affiliation1.Hung Kuang University Taiwan
2.National Tsing Hua University
Recommended Citation
GB/T 7714
Li Y.-L.,Shen M.-Y.,Chen W.-J.,et al. Creep behavior and mechanical properties of carbon fiber nano-composites[C],2011:156-165.
Related Services
Recommend this item
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li Y.-L.]'s Articles
[Shen M.-Y.]'s Articles
[Chen W.-J.]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li Y.-L.]'s Articles
[Shen M.-Y.]'s Articles
[Chen W.-J.]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li Y.-L.]'s Articles
[Shen M.-Y.]'s Articles
[Chen W.-J.]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.