UM
Short fiber reinforced geopolymer composites manufactured by extrusion
Li Z.1; Zhang Y.2; Zhou X.1
2005-11-01
Source PublicationJournal of Materials in Civil Engineering
ISSN08991561
Volume17Issue:6Pages:624-631
AbstractGeopolymer composites reinforced with short polyvinyl alcohol (PVA) fibers have been manufactured using the extrusion technique. The extruded products were thin plates with 6 mm thickness. It was demonstrated that short fiber reinforced geopolymer composites (SFRGCs) could be extruded without additional rheological modifier. Bending tests have been conducted with the extruded samples to investigate their mechanical properties. The fiber failure patterns in SFRGCs with various formulations were examined by scanning electron microscope and energy dispersive x-ray analysis techniques. The experimental results showed that the addition of PVA fiber could largely increase the ductility of SFRGCs, resulting in fiber failure modes changing from brittle to ductile. The effects of varying the amount of fly ash on the flexural behavior of various SFRGCs were also investigated. The SFRGCs incorporating small percentage of fly ash showed higher flexural strengths but smaller defections, while the SFRGCs incorporating a large percentage of fly ash had lower flexural strengths, but larger deflections. This could be attributed to the change of the bonding between fiber and matrix that led the change of failure mode from fiber fracture to fiber pullout. Journal of Materials in Civil Engineering © ASCE.
KeywordComposite materials Failure modes Fiber reinforced polymers Fly ash
DOI10.1061/(ASCE)0899-1561(2005)17:6(624)
URLView the original
Language英語
Fulltext Access
Citation statistics
Cited Times [WOS]:44   [WOS Record]     [Related Records in WOS]
Document TypeJournal article
CollectionUniversity of Macau
Affiliation1.Hong Kong University of Science and Technology
2.Southeast University
Recommended Citation
GB/T 7714
Li Z.,Zhang Y.,Zhou X.. Short fiber reinforced geopolymer composites manufactured by extrusion[J]. Journal of Materials in Civil Engineering,2005,17(6):624-631.
APA Li Z.,Zhang Y.,&Zhou X..(2005).Short fiber reinforced geopolymer composites manufactured by extrusion.Journal of Materials in Civil Engineering,17(6),624-631.
MLA Li Z.,et al."Short fiber reinforced geopolymer composites manufactured by extrusion".Journal of Materials in Civil Engineering 17.6(2005):624-631.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li Z.]'s Articles
[Zhang Y.]'s Articles
[Zhou X.]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li Z.]'s Articles
[Zhang Y.]'s Articles
[Zhou X.]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li Z.]'s Articles
[Zhang Y.]'s Articles
[Zhou X.]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.